14 Very Creative DIY Ideas For the Bathroom

14 Very Creative DIY Ideas For the Bathroom 8

14 Very Creative DIY Ideas For the Bathroom 8


It’s very obvious that all bathrooms require some vanity. It serves as storage for a lot of items and sometimes we all need some creative juices to help us be intuitive and do it ourselves. Look no further. Whether a beginner or not, these ideas will really help you build simple but creative vanities.



Use a bathroom vanity with the butcher which is leftover. You might have some ideas in mind of how to do this and want to make the bathroom look a bit much larger so you don’t have a congested vanity cabinet. It might not be so straight forward so cut off a bit of the bottom so they can be the tip of the legs of the vanity.

This particular vanity contains everything for a warm style and want cost you much. Start by building the panels on each side. Screw nails onto each side of the leg at each depth of the wood. Then the wood will easily be cut into sizes suitable for the panel behind. Cut the wood panel for support for the legs and then attach to the front and back. Use any template you would like. Preferably, use a smooth template to save you time. Create a frame with attachments to the panel.

This interior designed vanity is a bit unique. Install a baseboard on the left side and leave enough room for another baseboard. Use just a basic rounded quarter to have a reasonable attempt. If the left side is a half wall to any shower, remove the quarter side and slim it down through a table. It’s usually located in between the vanity so any painting wouldn’t really be noticed if at all noticed.

Here there needs to be a nice installation of vessel sinks and other stuff. You can look at some videos on internet before you try it out. It is very unique and should probably be done to the detailed definition. Also let it have a nice shelved space. You would probably prefer to attach it to the wall. You should remember to consider that it should be easy to access and easily deal with any plumbing issues.

Build a simple frame and put a piece of wood on the top so the box is easily opened from the top. It’s easier to organize anything this way. Put some planks on top to uniformly prevent some instability. Make it as unique and personal as you can and also feel free to change the design whenever you want.

It’s made mostly entirely from wood with any finishing easily applied. This way you can easily keep down cost as you can use the cheapest wood but make sure it’s durable. Before trying to figure out where to install it, try to assure yourself that the plumbing does not have any interferences.

Use some wood for the legs and the support to any preferred length. Doesn’t have to be expensive wood. Any type of wood will do. It would be better and easier to use equal pieces so as to save on costs.

Get nice straightened planks. It’s simple to see if any board is straightened. Just hold one end against the other and if you see it is not straight, palace it where you got it and take another one. Use any type of screws when you want to place onto a wall or some sort of surface. Label all labels as you rip them apart so you don’t mix scraps and pieces of the cut wood. Make a strong stance by joining the pieces. It might seem weird and something unusual but it turns out very productive. Give it a try.

Find a nice dresser. Make sure that it is very solid. Also check and make sure there are no cracks. Don’t be settle about doing things yourself. Get some smooth birch and then prepare a dresser. Install some drawers and divide them to make simpler dimensions. They should also be solid like the wood. If the height is a bit much, you can always shorten the legs at will. Just make sure it’s levelled. Don’t make a big mess out of a simple task.

It might be a bit rusty so you should give it a rough clean and flip the sink bowl on the other side and then trace the edges with anything light. Drill a small hole and then cut off the lines on the inside and cut along the lines that were traced. Clean the entire edges and make sure it’s smooth.

Get a smooth wooden table that has evenly balanced legs. It can be a dining table or just any kitchen table.  Apply some sanding to it and the boards and take your time. Create just a few supports for the front using any screws and install it to finish the vanity stability.

Don’t be shy with it. You can attach the pieces with some glue or adhesive and screw to the wooden sides. Always get a nice view of the top. Do the same process for all sides whether bottom or top. Level each side to finish off.

This one is optional and doesn’t always get framed evenly. To get a good stain for this, use leftover wood stain from anything and wipe it off quickly after applying in sections.

Try as much as possible to leave as much space as possible. Leave any opening for some shelves but don’t allow the space to become cramped. Put a bit of white along the cover and galvanize it. It’s very simple to install.


Most Popular Projects

  • 1. Bamboo in a Box
  • 7. Window Hung Plants
  • Stylish Industrial Home Decorations DIYs: 16. Mesh Box Lamp Shade
  • Stylish Industrial Home Decorations DIYs: 4. DIY Wire Spool Coffee Table
  • Incredible DIY Farmhouse Theme Decoration: 6. DIY Ladder Shelf
  • 11. Kitchen Plants
  • 6. Vintage Lamp Design
  • 3. Plant Boxes on the Wall
  • 17 Creative Ways to Use Mason Jars: 13. DIY Mason Jar Pen Holders
  • 3. Creative Garden Shed
  • 2. Bamboo Stick Holder
  • Stylish Industrial Home Decorations DIYs: 19. Pipe Wiring

Leave a Reply